wood cnc router spindle power is not the bigger the better
Customers often buy wood cnc router, put into 4.5KW 3.0KW spindle, and think to recommend standard woodworking machines 3kw enough, in fact, in terms of carpentry 3kw spindle carving up is more than enough, may be higher customer requirements, or listened to the introduction of other manufacturers are not sure,, we analyze the bigger spindle is not it more obvious advantages.
1. From the numerical point of view we can see, 4.5KW spindle power consumption is significantly larger than 3.0KW, 4.5KW spindle and genuine national standard must be three-phase power, so electricity costs increased significantly.
2.4.5KW spindle weight ratio of about 3.0 pounds too heavy, do woodworking machines especially cutting, alignment, requirements that speed, weight increased significantly reduces the operating speed of the machine.
3.3.0KW do stone engraving spindle no problem, do a simple cut MDF, doors alignment is very easy, so that by then the fundamental power is not necessary, but also increased the costs outweigh the benefits.
From the above analysis we can see, engraving machine spindle is not always better, as we like to buy a car, no one wants to configure high, but we must first analyze what is suitable to themselves, all things are not the most well, only the best for them, so also with the highest price, so we advise clients to buy when engraving machines do not blindly pursue how and how they want, and sometimes they think and can not play the greatest effect, we willing to offer you the most professional advice.
Spindle scientific selection method wood cnc router
1, starting from the engraving machine efficiency, lower speed and precision while ensuring at the same time without affecting the service life of the premise, need more power 3KW spindle motor.
2. Select the time to consider whether to adopt the high-precision bearings, such as not using, long after the high-speed rotation of the spindle overheat, affecting life.
3, listen to wood cnc router spindle rotating at different speeds even without the noisy sound of the voices, especially high-speed rotation is uniform and harmonious sound.
4, to see whether wood cnc router spindle radial force. Can high-speed cutting is mainly hard texture of the material. Some spindle only cutting of hard materials at very low speeds, at high speed cutting of hard materials, it will seriously lose spindle turn. This engraving machine spindle affect the accuracy after a period of time, or even failure.
https://www.youtube.com/watch?v=K8Y7bENHNAk
