DY-10/DY-13/DY-20 80/100/150W laser power supply for Reci 1200/1400/1650/1850mm CO2 tube
DY-10:80W CO2 laser power supply for Reci S2 80-90W CO2 tube
DY-13:100W CO2 laser power supply for Reci S4 1000W CO2 tube
DY-20:150W CO2 laser power supply for Reci S6 or S8 130-150W CO2 tube
1. Product Features:
1. This laser power supply adopts zero current and half bridge soft switch circuit, it makes the power supply have high efficiency and quick response speed. Thus it is easy to match with CO2 laser tube made by any factories.
2.
This laser power supply is easy to be controlled, it is suitable to High or Low
level signal. The TTL level can control start or stop of laser output. While
the power supply has emergency protection switch which can indicate water
through and ventilation.
3. The laser output power can be adjusted by 0-5V analog signal or PWM signal.
4. This laser power supply has open circuit protection function. When
protective earthing is good, the laser power supply can be in open circuit
status during short time. This function canprotec power supply when laser tube
burst.
2. Aging test:
Each laser power supply must pass this test which is taken at 60 degree centigrade for 12 hours in full load status. And the power supply must start and stop at each 7 seconds for 500 times. In this way we can ensure the laser power supply is qualified.
3. Specification:
Model No
DY-10
DY-13
DY-20
Output laser power
80-90W
100W
130-150W
Input AC Voltage
AC220V or AC110V
Input DC Voltage
DC 300V or DC150V
Input AC Frequency
47-440Hz
Max. Output Voltage
45-50KV
Max. Output Current
30-45mA(Depends on Laser tube)
Efficiency
91%
Over Current Protection
130% of Max. Current
Open circuit Protection
Yes (For short time)
Cooling
Fan Cooling
Voltage Range of High Level Control
Not Less Than3V
Voltage Range of Low Level Control
Not More Than0.8V
Working Temperature
-30 - +65 Degree Centigrade
Humidity
20-85%RH(No Dew)
Withstand
Voltage
Input-Output
AC1500V/MinNot More Than10mA
Input-Shell
AC1500V/MinNot More Than10mA
Output-Shell
Connected
Insulation
Not Less Than 50MOHM(DC500V)
Leakage Current
Not Less Than 1mA(AC220V)Not More Than 0.5 mA(AC110V)
Shock Resistance
Amplitude: 0.5mm, Frequecy:10-55Hz, 3D Dretion:2 Hours
MTBF
Not Less Than30,000hours
Full Load 60 Degree Centigrade test
12Hours
7 Seconds Start/Stop Test
500 Times
