Servo Motor Pulling Mesh Line Wire Manual Feed Rebar Wire Mesh Welding Machine
Rebar Wire Mesh Welding Machine Introduction:
The Rebar Wire Mesh Welding Machine also called reinforcing mesh panel welding machine. The machine is used to produce reinforcing mesh panel. The max weld wire diameter 9mm. The minmium wire diameetr is 4mm. Welding mesh width from 1000mm to 3000mm. Max mesh length up to 12m. The wire mesh welding machine adopts power electronic synchronous control technology, welding time and separate control welding are managed by automatic control system, human-machine interface, intelligent operation, humanization. Separate the welding transformer to reduce the requirement of power transformer.
Rebar Wire Mesh Welding Machine Features:
1. The control panel is more intelligent, very easy to operate. (Panasonic PLC program)
2. The line wires should be inserted into slot tunnels (cast iron material), suitable for different wire diameter.
3. The cross wires are fed from cross wire feeder, controlled by step motor.
4. Pure red copper (upper) and chromised bronze (lower), durable.
5. Clutch motor and helical gear reducer connect the principal axis directly, welding stable.
6. Casting water-cooling welding transformers, high efficiency. The welding degree is adjusted by PLC.
7. Panasonic (Japan) servo motor+planetary reducer and SMC (Japan) air cylinders for pulling mesh.
8. The cable drag chain is Igus brand, imported from Germany, not easily hang down.
9. The line wires and cross wires should be pre-straightened and pre-cut.
10. The line wires are inserted into the slot tunnels manually.
Rebar Wire Mesh Welding Machine Technical Parameters:
ModelDX-GWC-2000DDX-GWC-2500DDX-GWC-3000D
Wire diameter4-9mm4-9mm4-9mm
Welding mesh width2000mm2500mm3000mm
Line wire distance50--300mm50--300mm50--300mm
Cross wire distance50-300mm50-300mm50-300mm
Mesh lengthMax 12mMax 12mMax 12m
Line wire feeding wayPre-straighten pre-cutPre-straighten pre-cutPre-straighten pre-cut
Welding speed50-75 times per min50-75 times per min50-60 times per min
Welding electrodes40PCS48PCS60PCS
Welding transformer160KVA*7PCS160KVA*8PCS160KVA*10PCS
Main motor7.5KW7.5KW11KW
Pulling mesh systemBy servo motorBy servo motorBy servo motor
Control systemPLC and touch screenPLC and touch screenPLC and touch screen
Production capacity15-20 tons in 10 hours15-20 tons in 10 hours15-20 tons in 10 hours
Power consumption10-12kw/h10-12kw/h12-15kw/h
Weight5.8T6.5T7.3T
Dimension8*2.7*1.8m8*3.2*1.8m8*3.8*1.8m
Rebar Wire Mesh Welding Machine Applications:
Used for all kinds of reinforced concrete structures such as Bridges, expressways, tunnel backs, high-rise floors, subway culverts, power plant projects, dam foundations, ports, docks, river embankment protection walls, airport runways.
Rebar Wire Mesh Welding Machine Packing:
Rebar Wire Mesh Welding Machine Photos:
