Product Detail
Company Info
Quick Detail
Place of Origin
China [CN]
Brand Name
FlasonSMT
Model Number
KTU 350
HS-CODE
-
Package & Delivery Lead Time
Package
vacuum package
Delivery Lead Time
30 days
Detailed Description
Wave Soldering Machine KTU-350
Wave Soldering Machine KTU-350
Specifications:
Machine Specification
KTU-350
4th adjustable
Max.50~350mm
Matrix straight heating, heating efficiency up to 95%
750±50mm
Room temp. to 350℃,accuracy±1-2℃
Solder pot temp. accuracy
Angle
Finger types
Component height limit
Solder bar adding way
Wave height range
Temp. control
Wave quantity
Machine control
Preheating length
Width adjust
Preheating zone
Flux adding way
Conveyor direction
Flux flow rate
Preheat power
Spray method
Preheat temp.
Flux recycle
Heating model
Electricity
Solder bar type
Total power
Solder pot power
Normal running power
Solder pot capacity
Air supply
Solder pot material
Dimension
Weight
Machine coverStructure Streamline cover design, the frame is made of thick square tube, the cover is made of 2mm steel plate. There are totally 6 wheels to move the machine easily.Front door structure Fully enclosed glass door, transparent，pneumatic holder to support, ensure the operating and repairing space.Machine top Anti-explosion lampSurface treatment Painted with white colorFlux sprayingSpray nozzle Spray range:20~65mm,adjustable，nozzle height: 50~80mm adjustable，max. flow rate:100ml／minAir circuit Acid and alkali resistant air pipe, the brand is SMC from Japan.Nozzle moving system Step motor to drive, Mitsubishi PLC, with proximity switch and entrance sensor to control, according to the coming PCB’s speed and width, the spraying system can detect and starts to work.Flux recycle system Tray to hold the waste water and flux, can be draw out easily, make maintenance very convenient.Flux exhaust system Exhaust system：stainless steel mesh frame+ double layers filter，recycle the flux to maximum.Isolated air curtain Air pressure type knife, blow the redundant flux into the recycling box, to avoid the flux to enter into the preheating zones, ensures the safety.Spraying box structure Made of full stainless steel, easy to clean and repair. Anti-corrosion, very durable.PreheatingPreheating zone quan. Preheating length is 1800mm, divided into 4 sections, supply abundant adjusting space, very good for big PCB and complicated PCB. Reduce the heat impact on PCB, improve the production efficiency.Temp. control method Mitsubishi temp. collecting module, PID is very precise and stable.Heating parts The heaters are imported from Taiwan, heat up very fast, with long life, small thermo lag; The heat is even in the zones.Preheating power 22kwInstall mode The heating module adopts drawer design, easy to replace and repair, make the maintenance very convenient.TransmissionRail Made of aluminum, wear resistant and without distortion.Rail parallelism Width adjusting accuracy less than 0.2mmWidth adjust Manually/motorizedC/V speed setting unit Min.1mm／min 0-1800mm／minC/V speed variation range Electric closed-loop control, within 0-10mm／minConveying motor Panasonic motor from JapanSolder potLow oxidization design High quality solder pot, the heat is very steady. Adopts liquid solder flow design, reduce the impact oxidization, especially for small PCB.Economical running Reduce the power consumptionMoving method MotorizedWave adjustable height 0-18mmWave motor TCG motor from Taiwan，adjust the wave height with frequency conversion.Preheating parts Adopts the stainless steel heaters from Taiwan, with long life and power saving up to 40% daily.CoolingCooling method Adopts high power centrifugal fan, reduce the air bubble and solder pad strippingAutomatic finger cleaningImported premium pump, can wash the fingers from both sides. Propyl alcohol to clean and can be recycled.Control software★Automatic alarm function for failure:：thermocouple abnormal，temperature is too high or too low；if preheating system or solder pot is abnormal, the heating stops.★Preheating temp., solder pot temp., conveyor speed, spraying and cooling can be controlled separately.★One week automatic power on/off setting （three times one day）★The emergency stops are in front, rear of the machine, press them in case of any emergency.Nitrogen protection system (option)Standard N2 configuration includes nitrogen closed construction, pipes, N2 flow meter, water chiller and oxygen analyzer.★N2 protection system, can prevent solder paste from oxidization, improving the moisture of soldering points, reducing the faults of soldering.★Low nitrogen consumption design(10-20cbm/Hour), oxygen density can be keep between 300-1000PPM.★Nitrogen can be reused after filtering, production cost is therefore saved.★Nitrogen flow rate and oxygen analyzing system are easy to be observed and adjusted by the flow meter and oxygen analyzer.
Keywords:
